3rd Aug 2011 7 Comments »
The first thing everyone searching for autoflowering cannabis growing with CFL bulbs should know is that you CAN grow autoflowers with CFL(compact fluorescent light). The end yield and plant size won’t be anywhere near what the HID(high intensity discharge) lamps can produce , but you will still be able to produce some fine auto flowers and do it all not spending hundreds of dollars on sophisticated light systems. Auto CFL growing is perfect for beginners or growers who have small growing space or heat problems as the CFL bulbs don’t produce much heat and can be put in close proximity of the cannabis leafs.
So what exactly are These CFL lights?
The compact fluorescent lamps are basically the same as the regular fluorescent light tubes but much smaller and compact. The way that this lamp works is similar to the regular fluorescent tube: The low pressure gas (typically argon) and a bit of mercury are sealed in a glass shell that has a coated layer of phosphor. When electricity is provided to the lamp it excites the mercury vapor that is in the glass shell. This Excited mercury then produces ultraviolet light that causes the inner coating (phosphor) of the bulb to fluoresce, producing the light that we can see. Typically the compact fluorescent lights are designed to fit into the regular household light fixtures and they are typically 5 times more economical than the incandescent bulbs and that means cheap grow operations! Another bonus for using these CLF lights bulbs growing autos is that they will last five times longer than the incandescent bulb and at so lengthy life span you will probably see many harvests before the bulb brakes..
Some people may confuse the wattage that is shown on the bulb and think that the incandescent equivalent wattage is the real number to look at but you should really be looking at the actual compact fluorescent lamp wattage. The actual wattage that the CFL uses is the thing that you need to check and that is the real amount of watts that the bulb uses. The incandescent equivalent of the CFL is almost 5 times higher and that means that if you buy a 20 Watt CFL with 80 Watt incandescent equivalent then the actual number of Watts that your bulb will use is 20 and that means more money to by some more autoflowering seeds or additional bulbs ! The 80 watts is only a number that shows what wattage incandescent bulb you can replace with your CFL and get the same amount of light and lumens.
So now we know how CFL wattage’s are measured but what are the best wattage bulbs to buy? There are various choices from 13W to 200W and even 250W CFL bulbs but which are the best? You can grow autoflwoers with all of those bulbs and if you choose the low wattage bulbs you will need many bulbs scattered around the plants but if you choose the 250W then that one bulb could be enough ! Basically the lower wattage bulbs 13W to 25W have too low light output and they are not as efficient as for example the 40W or 45W bulbs. From the other hand the bigger Wattage bulbs are too expensive and also have lower lumen output so the most efficient bulbs are in the mid range from 30W to 50W and with these you will get the biggest bang for your buck!
You can check the end of this article where you can find links to some of the best CFL grow lights!
The lumens is the mount of light that the bulb can emit and more is obviously better. 1 lumen is the light that one candle can emit multiplied by one steradian. Usually CFL light bulbs have a lumen to watt ratio of somewhere between 50 and 80 and that is a good number compared to the incandescent bulb lumen to watt ratio of 10. You need 2000 to 5000 lumens per square foot of growing autoflowering plant. The lumens that are emitted by a CFL light diminishes very quickly (exponentially) and you need to get the bulb as close to the auto plant as possible. If your cannabis plant is very close( 1 to 4 inches) to the CFL bulb then it will receive the stated lumen ratio that mentioned on the packaging, but if you move is 2 times farther it will receive 4 times less lumens (the start lumen count divided by 2 squared). This means that you need to have multiple CFL bulbs around your autoflowering cannabis plant at a very close proximity to maximize the growth and yield.
CFL bulbs emit light in all directions and if you don’t have cannabis growing all around the bulb then those sides that are facing away from the autoflower plant are trowing away light! This can be partially fixed with coating all your grow room walls with reflective materials like Mylar that will reflect all the light back to the pants but that light will be less intense! The best action to take is to introduce a Light reflector that will reflect all the light from the tree unused sides of the bulb to the one side where the plants are growing and you can increase that bulbs intensity by almost 300 % and that means more buds and bigger yields!
At the end of the article we will give the best choices for CFL reflectors!
The color temperature is the temperature of an idealized physical body that absorbs all incident electromagnetic radiation (think of a black metal) when it’s heated to the specific temperature like for example if the temperature is 2700 K then the “black body” would glow at a warm yellowish white color (warm white) but if the temperature of the “black body” is more than 5000k then the light is “daylight”.
In nature the “daylight” or the 5000+ K shines for wild ruderalis plant early and mid stages of growth but when the “warm white” 2700- K light start appearing as the sun’s light is scattered more and more by the atmosphere as the sun is not as high as it is in summer, regular cannabis plant would start to flowering but autoflowering cannabis plants can grow and grow until they trigger to start flowering automatically. This mean that the majority of the CFL bulbs must be “daylight” when your plant is growing and producing leaves and stems( for the first 2 to 4 weeks), but when it start flowering you can switch some of your bulbs the “warm white” spectrum but it is not necessary as you are growing auto cannabis seeds that are not effected by light cycle and will flower under almoust any light. The best way to grow with CFL bulbs is to supply equal amount of 2700K and 5000 to 6400 K lights and maybe even some bulbs that have 4000K equivalent light because then your plants will get all color spectrum lights and will be able to produce more buds!
One more CFL advantage is that much of the light emitted by these lights is usable to cannabis plants in the photosynthesis and if you would compare a 200 Watt HPS lamp and and equivalent wattage CFL bulb setup then you could see that the HPS produces 25 % more lumens but the Photosynthetically Active Radiation or PAR index of the HPS bulb is much lower and basically those two set ups would be equally efficient in producing buds but the CFL bulbs run at much more cooler temperatures and you can space them out to get more light on more leafs and buds!
CFL bulbs are perfect for autoflowering cannabis growers who have a heat problem, because they emit very little heat and you can even touch the bulb with your hands and not get burned. The cannabis plant can be very close to the CFL bulb and not get any heat burns and receive the maximum lumens from those cfl bulbs. Basically the closer the light is to the plant the better - the best distance between the autoflowering cannabis plant and the CFL bulb is 1 to 4 inches (2.5 to 10 cm)
Best CFL products!
Best 42 W and 45 W CFL bulbs
Best reflectors and bulbs with reflectors
Best regular and High wattage CFL bulbs